Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello everyone, we use the Cisco ASR9902.i am trying to set up RTBH functionality for our configuration in an IXP (internet exchange point) with route-policy : #show running-config router bgp
---
neighbor 2001:7f8:14::11
remote-as 47200
use ses...
Hi @Harold Ritter ,you are the best :). Many many thanks for your help.If i tried shutdown the RPKI, then routes are accepted. #sh route ipv6 2a02:38:bbbb::10/128
Thu Jan 30 08:02:18.409 CET
Routing entry for 2a02:38:bbbb::10/128
Known via "bgp **...
Hi @Harold Ritter ,yes, aaah, i configured RPKI before this project RTBH.....#show bgp rpki table | in "2001:7f8:14"
Wed Jan 29 22:10:38.474 CETNo network in rpki table found.
Hi @Harold Ritter , sure, here is output : #show bgp ipv6 unicast 2a02:38:bbbb::10/128 bestpath-compare
Wed Jan 29 21:04:54.342 CET
BGP routing table entry for 2a02:38:bbbb::10/128
Versions:
Process bRIB/RIB SendTblVer
Speaker ...
Hi @Harold Ritter,many thanks for your help.So, i set the enforce-first-as disable for the both neighbors, but nothing changed.It still doesn't working :(.
Hi Harold,sure, here are outputs for requested commands :#show bgp ipv6 unicast 2a02:38:bbbb::10/128
Tue Jan 28 13:22:42.748 CET
BGP routing table entry for 2a02:38:bbbb::10/128
Versions:
Process bRIB/RIB SendTblVer
Speaker 377528327 377528327
Last M...
