Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Please refer to the picture I added. I have a situation where in ZONE1 and ZONE2 NEED to have the exact same IP address schemes. ZONE1 and ZONE2 connect to SW1 via point2point connections. The idea is that host connected to SW1 in the 10.0.0.1 need t...
Hey guys. I posted a few months back about an FPR issue I was having. I had an inside interface 192.168.1.1 and my outside 100.1.1.1. No NAT. Not going out to the internet. I wasnt able to ping from outside in. So I made an acl:access-list OUT-IN ext...
I am studying for the DCCOR exam and I would like to study "Implementing Cisco Application Centric Infrastructure". I wanted to purchase physical hardware, APIC, 2 Spine, 2 Leaf switches but I cannot find anything within my price range. I read about ...
Hi!I have around 20 local networks. Im posting a basic topology with only 4 networks. Each server represents a network.Everything internally is working fine. Nothing will be going out to the internet. This is all within house. Now there is aclient th...
Im using a loopback interface from the external client trying to ping my inside networks. On wireshark the loopback address doesnt change to my inside address.
so the amount of acl's id have to do is alot. I was thinking can i NAT the outside int from the ASA and allow only 10.0.0.0 to access my internal networks?I did:object network EXTERNALsubnet 10.0.0.0 255.255.255.252object network INSIDE192.168.0.0 25...
