Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a ticket open with TAC for 28 days now with no resolution in sight so I'm looking for help!!! With the FWSM in place the Norton Ghost image transfer gets to 25% of an 80 MB file and fails. With the FWSM removed, the transfer completes correc...
I am working on a FWSM using code 2.2(1) and I would like to proxy all web requests to a Squid box from the Inside interface to the Outside and I am trying to use the static command. All of the examples I have seen go from Outside to Inside. I have...
We're in the process of buying FWSMs for a 6509 chassis. Can anyone point me to a good source for sample configurations including switch and router configurations for a hybrid setup. I've settled on configuring the module in routed mode and would l...
I have a Cisco 3015 and I use a pool to assign IP addresses to clients. How do I send the assigned/private pool address in the syslog message to the syslog server? I am using this information for tracking security incidents. I am able to send the ...
Multicast is not supported in routed mode. It is supported in transparent or bridging mode. Cisco says it will support multicast in routed mode in verion 3.1 which is due out in Q3 or Q4.
Thanks Glenn, sorry for the delayed reply but I was out of the office. This makes perfect sense now. So if I put one more static command for the traffic coming in the opposite direction that should fix the problem I'm having. The second question i...
Thanks for the information Marco. I was really looking more for sample configurations on how you configure the FWSM, router and switch layers. The only sample I could find was the below:http://www.cisco.com/en/US/products/hw/switches/ps708/products_...
