Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
I'm in the process of setting up a guest network. I set all of the ports with APs and the wireless controller to trunk, as well as the ports connecting switches. I created VLAN 20 for a guest network, and set an interface on an ASA 5512-x ...
I got everything working. After setting the port to the DMZ interface as an access port, I was able to get VLAN 20 traffic to be able to connect to the interface. The final issue I had was that guest network clients were not being assigned IPs, due...
"- is it true that there is one connection between the switch and the ASA? Or is there more than one connection?"
Yes. There are two separate connections to the ASA. One on the physical inside interface (for inside net), and one on the dmz interf...
Sure. The port connected to the firewall is a trunk (G1/0/6). I've tried it as an access port, as well. Interface 1/0/38 is the one that the laptop is connected to. I've attached both configs (removed public IP info from firewall config).
