Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
In the following text, what do the numbers " 10 3 5 " in the keepalive line represent. It is obviously intervals of time but what specific intervals? Thanks for your helpbc(config-service[serv1])# show serviceName: serv1 Index: 1Type: Local State: ...
I have been out of the WAN world for about a year now and my memory is slipping so I am hoping for some help. I need to extend 4 T1s from a SmartJack (with the RJ48/RJ45 on the back) to a 2691 router. Can I accomplish this with a standard straight ...
How are packets that are routed to an HSRP subnet routed? Does the virtual router assume control of all packets destined for the subnet...meaning is one router responsible for all traffic coming and going...or are the packets routed to either one of...
A co-worker and I are trying to figure out the reason for a particular statement in this example...hoping for some help. This example is the Surf & Sand network merger. Our question has to do with access-list 1. The exact line in question is this:...
I performed an IOS upgrade on a 2621XM. After the upgrade it appears that the application of any access list will kill all web traffic. I say this b/c of the following: I did not make any changes before or after the IOS upgrade; after the upgrade w...
Two things:First, I added the appropriate statics to the box and it still seems like a now go.Secondly, I've got some things to do but I'm going to post a Visio after a bit so you can all know what I'm dealing with.Thanks again!bc
Routes...ahh...we might be on to something here. Actually anywhere I try to ping from I can't seem to get anything. I am only able to get into the box via the mgmt ip. This IP is on the same segment as a linux box that I ssh to. So, for these cir...
I actually did see that document...I actually have the PDF downloaded on my PC. I was, however, a bit confused on why some of the things in the document were configured. Are the *bridge state*, *bridge pathcost* and *bridge priority* commands requi...
