Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I have a questing regarding the AP Management Port on the 5508.At our customers side there are some FAT-APs and we want to migrate them to the controller.There is no DHCP Service active on the network (security-restriction by our customer) and...
Hi Mubasher,no you dont have to reboot your controller in this case.Normaly if there is NOT configured "block" it should work.So the default value should be "disable".Disabled—Disables peer-to-peer blocking and bridges traffic locally within the cont...
Hi Mubasher,have a look at the option P2P Blocking Action in your SSID Configuration.In GUIWLANs > Edit -> Advanced -> "P2P Blocking Action"maybe there is your configuration issue.regards,Simon
Hi weterry,so you are right, the log message wasn't caused be the discovery request with the helper.I dnot know why the helper (or here on Nortel "Relay-Agents") havent worked.So I now configure the DNS Server within the upgrade-tool and it works qui...
Hi weterry,thanks for your reply!Yes, that what I thougt about it!So you think, that the discovery messages which is the cause for the log message is not the one which is sent over the ip-helper?I'm going to check the forwarding ports with our custom...
Hi Yao-Jin,have you already checked if there is a configuration at "DHCP Server overide" on your SSID?WLAN -> -> Advanced -> DHCP Server "Override"Otherwise I would recommend a Debug DHCP.regards,Simon
