Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,Tried to get Motion Detection to work but I am having problems.Below are the HW we are currently using:CIVS-MSP-1RU (4TB)CIVS-IPC-2500WCIVS-IPC-4500Tried disabling VMR and DVR and I am still not able to see the live feed.I am using two client ...
I hope Cisco will publish a configuration guide for motion configuration and other complex configuration. Hopefully, with screenshots as well because the help functions on the VSM is not that helpful sometimes.
I tried using the power injectors for Cisco Aironet and it worked fine. However, there could be problems with other PoE switch because I broke a camera when I plugged it to a Nortel PoE switch. It will be much better if Cisco provides a list of power...
I think you have misconfigured the camera. You need to first configure dual stream on the camera. Make sure that you use the correct CODEC because some cameras only support MPEG4@4CIF for the primary stream and MJPEG@CIF for the secondary stream.
The laptops that I am currently using are Toshiba Satellite Pro M200 and a Portege M900. The M200 have an Intel GMA and the M900 has an ATI HD 4570 video cards but I believe that you can still configure motion detection using an ordinary video card b...
Thanks ejohnson73. That solved the problem. I am now able to view the 4500 IP camera using the DxPlayInstaller that is provided by the camera. But I am still having problems with the motion detection.
