Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Folks,I have an ASA5510 where I have defined object-groups and then associated them with a specific ACL. Our ISP is pulling their point of presence from where I live and I am force to move to a new ISP. I am in the process of setting up another ...
Hi Folks,I have a remote access VPN setup on an ASA5510. I am making a connection using Cisco VPN client (5.0.04.300).I am able to make the connection and authenticate, but I am not able to access any of the local resources. I can't ping them or acce...
Hi Folks,I am testing an ASA5510 configuration prior to implementation. Currently we use static NAT for a number of machines located on the inside network that we access from the outside. I use Access-lists to control what ports are opened up. Every...
I am trying to setup a dmz and I am running into problems. I setup a windows server in the dmz thinking I would be able to ping it or at least access the fileshare. No luck. (No I won't do this in a production environment) I am new at setting up a dm...
I have setup a Remote Access IPSec VPN connection to an ASA5510 appliance. I am able to establish the connection, however, there is a delay upwards of two minutes before I am able to ping anything on the internal network, or access resources. The st...
Thank you. That is what I was hoping for. I will have two different ACLs, each bound to a different interface allowing traffic from the outside in, and was hoping that these two ACLs could be configured to use the same object groups.
Thank-you...The crypto command didn't fix it, but as soon as I modified the access-list, it worked.One more question...What if I want my remote VPN clients to have the ability to administer machines in the DMS (10.30.30.0) from the inside? What would...
Thanks, but I had them setup properly. I use names instead of IP address for the outside, and that is what I was listing.Thanks to all that replied..Everything is working fine now.
Thanks, I will give it a try. Only one other questions. Do I need to change the STATIC entries for the machines in the DMZ. Currently they are setup with STATIC (dmz,outside) TEST 10.30.30.50 netmask 255.255.255.255The machines on the inside netwo...
Well, it look like I figured out the problem, or at least know the culprit.I tried using the VPN client on another machine in my test network, and it worked without a hitch. Within a second or two the resources became available.The original machine I...
