About sgoethals1

sgoethals1 · 07-21-2011

Hi Folks,I have an ASA5510 where I have defined object-groups and then associated them with a specific ACL. Our ISP is pulling their point of presence from where I live and I am force to move to a new ISP. I am in the process of setting up another ...

sgoethals1 · 05-14-2009

Hi Folks,I have a remote access VPN setup on an ASA5510. I am making a connection using Cisco VPN client (5.0.04.300).I am able to make the connection and authenticate, but I am not able to access any of the local resources. I can't ping them or acce...

sgoethals1 · 05-13-2009

Hi Folks,I am testing an ASA5510 configuration prior to implementation. Currently we use static NAT for a number of machines located on the inside network that we access from the outside. I use Access-lists to control what ports are opened up. Every...

sgoethals1 · 12-17-2008

I am trying to setup a dmz and I am running into problems. I setup a windows server in the dmz thinking I would be able to ping it or at least access the fileshare. No luck. (No I won't do this in a production environment) I am new at setting up a dm...

sgoethals1 · 12-16-2008

I have setup a Remote Access IPSec VPN connection to an ASA5510 appliance. I am able to establish the connection, however, there is a delay upwards of two minutes before I am able to ping anything on the internal network, or access resources. The st...

sgoethals1 · 07-21-2011

Thank you. That is what I was hoping for. I will have two different ACLs, each bound to a different interface allowing traffic from the outside in, and was hoping that these two ACLs could be configured to use the same object groups.

sgoethals1 · 05-14-2009

Thank-you...The crypto command didn't fix it, but as soon as I modified the access-list, it worked.One more question...What if I want my remote VPN clients to have the ability to administer machines in the DMS (10.30.30.0) from the inside? What would...

sgoethals1 · 05-14-2009

Thanks, but I had them setup properly. I use names instead of IP address for the outside, and that is what I was listing.Thanks to all that replied..Everything is working fine now.

sgoethals1 · 05-13-2009

Thanks, I will give it a try. Only one other questions. Do I need to change the STATIC entries for the machines in the DMZ. Currently they are setup with STATIC (dmz,outside) TEST 10.30.30.50 netmask 255.255.255.255The machines on the inside netwo...

sgoethals1 · 12-16-2008

Well, it look like I figured out the problem, or at least know the culprit.I tried using the VPN client on another machine in my test network, and it worked without a hitch. Within a second or two the resources became available.The original machine I...

Member Since	‎09-12-2005 04:44 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	37

User Statistics

User Activity

ASA5510 Object Groups

Cant access internal network resources through Remote Access VPN

ASA and DMZ Setup

DMZ Configuration

VPN Delay

ASA5510 Object Groups

Re: Cant access internal network resources through Remote Access

Re: ASA and DMZ Setup

Re: ASA and DMZ Setup

Re: VPN Delay