Dears,Am working on ISE 1.1, and am facing a problem after the posture assessment for a machine, if the machine doesn't have the correct antivirus, the NAC Agent suggest the following link remediation: http://kaspersky.test.com, when the user tries t...
Dears,I have two ISE appliances installed in a distributed deployment (primary "ISE1" and secondary "ISE2"), each node has the three personas installed on it. The servers are registered together and the replication is working prope...
Dears,I'm working on ISE 1.1 version, am facing the following problem:When the user turn on the PC , he can access to the network via Dot1x , but when the PC go to the sleeping mode , the Dot1x timed out , and the authentication type become mab ,...
Hi Tarik,Yes it is correct we have used semi colon ; to delimit the two ISE hostnames and in the Mode column we have used override mode as per the attached pic.regardsZahi
Dear Tarik/Bikespace,I have added in the discovery host the name of the second ISE as per the below picture and it worked properly the agent is now able to pop up. but is there a way to do this for all user without going to the agent on each machine ...
below are the outputs:SW#sh run | in aaaaaa new-modelaaa authentication login default localaaa authentication login TEST group radius localaaa authentication enable default enableaaa authentication dot1x default group radiusaaa authorization network...
