Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,I have a C3850 setup with the attached config, 3850 is the WLC with an attached 3802 AP. This is a test setup I am working on and I am having an issue with the wireless clients. They are able to connect to the WLAN (vlan30) and successfully...
I was trying to use just the hardware I was given for this experiment. That being said, I did try creating a 9800-CL vm to make sure this was not some issue with the AP. I was able to create the WLAN and get everything kind of working in a round abou...
I just realized the date on the output above, could that be causing this? Does the AP not sync its time to the WLC?edit: Disregard, the clock is correct. After I plugged it into an access port again it connected to the WLC everything synced.AP780C.F0...
Unfortunately when I configure the port as a trunk for vlan 11 and 30 the AP doesn't ever connect to the 3850. My understanding is that the port should be set as an access port for the wireless management vlan and that the CAPWAP tunnel carries the o...
