Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've tried the following kids of Mode button pushes, but none have worked. The switch is stuck on serial console in Meraki managed mode (I want to start over and put it into Meraki Monitoring mode instead...):=========================================...
hi, in reading about CVE-2017-3881:https://www.cisco.com/c/en/us/support/docs/csa/cisco-sa-20170317-cmp.html I see it says: "Cisco has released software updates that address this vulnerability."But nowhere in that webpage do I see which *version* o...
I made the mistake of running "factory-reset all secure 3-pass", not realizing this would sanitize the C1121X-8P requiring me to obtain my own IOS 17.6.3a image to recover it.What do I need to do to obtain this image, or the latest official C1121X-8P...
After i removed and unclaimed the device, it remained stuck on the serial console. I had to call Meraki tech support, and they were able to get it unstuck, but i'd still like to be able to factory reset it from the front panel.
The image worked, and the C1121X-8P is running and configured!Also, I looked at a few more CVE's, and they all had the same notice - so Leo's method appears to be much more generally applicable!Great news!Thanks again Leo - this insight has been a ga...
Leo - WOW - This worked - I just now downloaded the file. Monday I'll work to install it (via USB), then start the configuration.This is what I did:1) Wrote to the email address the agent gave me on the phone:Cisco.com Contract Associations <web-help...
Two questions about software versions:1) What is the difference between regular Cisco IOS and "Cisco IOS XE"? My reading tells me that the C1121 indeed uses the "XE" version.2) Why did you point me to:Release IOSXE-17.15.2a EDc1100-universalk9.17.15....
Thanks! Looks very helpful. But i did call Cisco before reading your post.Actually, first i did an online chat last night, and that guy told me to call 1(800)462-4726 and press option 3 (which turned out to be tech support (?!?!).Just now, the person...
