Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
How do I remove the statement "no ip mroute-cache" from my vlan config!interface Vlan315 description AGS ip address 10.10.20.1 255.255.252.0 ip helper-address 10.4.48.1 ip helper-address 10.4.55.5 no ip mroute-cache!I had Multicast routing on with th...
I have vlan 10 set up on our 3750 switch for our SAN .I would like to block everything else from the outside world except for one computer (10.4.53.201) which resides in vlan 305.What would be the best way to do this (please show config)-------------...
I'm in the process of setting up vlan on our 3750 Cisco switches I need 14 vlans our network addresses starts with 10.10.0.0/22 (10.10.4.0/22, 10.10.8.0/22, 10.10.12.0/22?)When I configure the vlan using rip as shown below everything works correctly ...
I'm in the process of setting up vlan on our 3750 Cisco switches I need 14 vlans our network addresses starts with 10.10.0.0/22 (10.10.4.0/22, 10.10.8.0/22, 10.10.12.0/22??)When I configure the vlan like this everything work correctly I get handed a ...
Yes when I run rip I can get to the servers as well as the internet. The issue I'm having is it only works running Rip if I use Rip Version 2, OSPF or EIGRP routing does not work...This works!router rip network 10.0.0.0!ip classlessip route 0.0.0.0 0...
Ok I setup 2 Workstations in each vlan set the gateways as the Vlan address, removed all routing protocol and I can ping each Workstation...So InterVlan routing is working...Thank you!!!Now a little more complicated problem, I cannot change the Gatew...
