Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Morning all,We are currently trying to allow SNMP through our firewall from an external client to allow them to monitor one server. The server has two static port based NATs configured one for WWW and the other for SNMP.Is it possible to allow SNMP t...
Hi,Reading through the documentation recommendations and I would like to configure the following setup http://www.cisco.com/en/US/docs/security/asa/asa83/asdm63/configuration_guide/ha_overview.html#wp1095702 scenario 4, figure 58-6 but I can't find s...
Hello,I'm not certain if I'm posting this question in the correct forum but I'm sure many of you will have some very valuable input.I'm designing a network setup and have two options for configuring the outside switches and cisco ASAs.Option 1, the o...
Hi,I've been looking for some information to explain what happens when an ASA fails over to the standby member, could any one help explain or point me to the right documentation?I'm specifically interested in failover times, and what happens with the...
Hi,We are currently having an issue configuring our wireless interface to allow access to the internet.We have an Cisco 1841 with two external connections that we have been configuring, with use of a route-map, to direct all traffic except for traffi...
Ok,I figured out how that we needed to configure a pair of redundant interfaces and then setup the failover using the redundant interface.I have tested with both cross over cables for the connectivity between the interfaces and straight through cable...
Hi Jon,Thanks for the reply, sorry for the lack of detail.Basically, we will have three external connections coming in to our network and none of them should be allow to route to each other but each of the connections will need to connect to some sys...
