Hi All, After a password recovery via console. Voicemail stopped working. People cannot leave voicemail. When I dial 399 it doesn't go anywhere, no error messages or dialtone. MWI light is off. Please see the below brief data: attached further below as an attachment is the detailed running-config with some details removed. -show version UC_540#show version Cisco IOS Software, UC500 Software (UC500-ADVIPSERVICESK9-M), Version 15.1(2)T2,                                                     RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2010 by Cisco Systems, Inc. Compiled Sat 23-Oct-10 08:04 by prod_rel_team ROM: System Bootstrap, Version 12.4(24r)SB, RELEASE SOFTWARE (fc1) UC_540 uptime is 56 minutes System returned to ROM by power-on System restarted at 15:53:20 WST Wed Jan 15 2014 System image file is "flash:/uc500-advipservicesk9-mz.151-2.T2" Last reload type: Normal Reload Cisco UC540W-FXO-K9 (MPC8358) processor (revision 0x100) with 249856K/12288K bytes of memory. Processor board ID MPC8358 CPU Rev: Part Number 0x804A, Revision ID 0x20 22 User Licenses 10 FastEthernet interfaces 2 terminal lines 1 Virtual Private Network (VPN) Module 6 Voice FXO interfaces 4 Voice FXS interfaces 1 Voice MoH interface 1 802.11 Radio 1 cisco service engine(s) 128K bytes of non-volatile configuration memory. 254464K bytes of ATA CompactFlash (Read/Write) License Info: License UDI: ------------------------------------------------- Device#   PID                   SN ------------------------------------------------- *0        UC540W-FXO-K9         Configuration register is 0x2102 UC_540#ser i 0/0 status Service Module is Cisco Integrated-Service-Engine0/0 Service Module supports session via TTY line 2 Service Module is in Steady state Service Module heartbeat-reset is enabled Getting status from the Service Module, please wait.. Cisco Unity Express 8.0.3 CUE is on UC500UC500 se-10-1-1-113# show software version Cisco Unity Express version (8.0.3) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2010 by Cisco Systems, Inc. Components: - TimeCardView version  8.0.3 - PhoneConnect version  7.0.0 - CUE Voicemail Language Support version  8.0.3 - Monitor Agent version  7.0.0 - Madrox Multi-app Support version  8.0.3 ... View more

I have set up hunt group voicemail button on one of the phones. I can login and set up the new password, but when I get to the stage of recording the unavailable voicemail. It hangs up straight away with call end on display with out giving time for the recording. I have tried to dial the voicemail hunt extension it does the same thing. ... View more

Hello People, I decided to change the topology to let a 3rd party DHCP server (SBS 2011) handle DHCP. After applying the changes, I plug the network cable between the UC320W and the Linksys/Cisco SRW2016 Gigabit switch. Soon after the whole network stalls. It's like a collision storm, can't ping anything-no connectivity at all. The only way to get the network back is to unplug the network cable between the UC320W and the Linksys switch. But I had to reboot the UC320W as well - cannot access the web interface or ping the UC320W. I tried different topologies with no difference. No matter what I do, if I plug the network cable from one of the lan ports to the Linksys switch, the whole network stalls. The only setting I have changed recently is the SBS 2011 DHCP server, I added option 150 and pointed it to the voice vlan IP. Any suggestions? ... View more

Hi, I like to say, assign top right 1st button as an outgoing fxo line(s). Then assign right 2nd button as an outgoing sip line. This will allow the users to select the lines of their choosing. Is there a way to create your own dial plan? ie: press 5 followed by the phone number, this will go out via the sip line. Thanks ... View more