Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
anyone use letsencrypt certificate for WLC 9800-CL?I managed to import the letsencrypt cert using CLI, but from CSR and step by step, but after 3 month, what can do? redo all the step again? There is GUI to import, but does it really work?
Hi,The connection can be simplified like below--- Gateway ---- WLC --- AP --- DeviceThe Gateway provided the DHCP service, after that the device is able to discover the MAC of the gateway,the problem is, when the ARP entry expires on the gateway, the...
WLC 9800-CL17.17.1The management port of mt WLC is 192.168.1.201, and 192.168.1.197 is my RADIUS.I am trying to send CoA from 197 to 201, but I got no response from the WLC.1. able to ping 2. "show run | section aaa", I can see belowaaa server radiu...
Is it possible that you can list down what settings need to be verified?I can check the settings one by one,This is just a very basic feature, but somehow the Cisco WLC is not working as expected.
WLC#show run vlan
Building configuration...
Current configuration:
!
vlan 2-7
!
vlan configuration 4
arp broadcast
end
WLC#i observed the settings on the UI as well, but it still behaves the same, still not reached
1. I can confirm the setting on the UI is ON, it is under "profile-> advanced->Policy Proxy Settings"2. the console also telling the same info, below is the output of the "show run"wireless profile policy Test4no accounting-interimno central associat...
