Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I currently have an IPv4 site-to-site VPN betewen two IPV4 and it works fine (ASA5505).Now I would like to set up, in addition to that tunnel, an ipv6 to ipv6 site-to-site vpn between those same endpoint. To be clear, the endpoints will speak ove...
Hi,I have an ASA5520 with AIP-SSM module. I inspect in promiscuous mode. Security vulnerability scans create tons of alerts in the IDS system. I'd like to exclude certain IP addresses from the IDS. I tried to modify the inspection policy in ASDM b...
If you bought this from an all-mighty cisco certified reseller, then they should help you. I had this problem, and the reason I was told that cisco couldn't help me, was that I didn't buy it from a certified reseller. In the end, with some convinci...
Are you sure the 5520's take ECC RAM? I looked up the model number of the RAM that I removed the 2 x 256MB RAM that was previously in my ASA5520 with 4 slots. It was not ECC. I read furthermore that the 5505's won't boot with ECC RAM; not sure if ...
We are in the same boat. One of our ASA 5520 has 4 DIMM slots, one has 1 slot. sh ver and sh module is exactly the same between the 2 units.We have an open TAC case in which the resolution is to upgrade to 8.3. We'll escalate this issue there to s...
