About amjad.aljada

amjad.aljada · 02-12-2011

hi ALL,i would like you to share information for the below case,i have 3 subnets behaind a firewall ( FW not cisco not supporting EIGRP)172.30.0.0/24172.30.1.0/24172.30.30.0/24on core switch i have created 3 static routes pointing these networks to t...

amjad.aljada · 05-12-2010

Hii'm tring to enable jumbo frames between 3560E (Access) & 6509E (Core)for 6509E jumbo frames support MTU size(config)#system jumbomtu ? <1500-9216> Jumbo mtu size in Bytes, default is 9216for 3560E jumbo frames support MTU size (config)#system m...

amjad.aljada · 02-12-2011

thanks Peter,i have tried this before, All RIP updates disapear.which is for me not comportable, rip database almost empty except for the local advertised routes.the main problem in this case is all routes that must be reached through the slow link a...

amjad.aljada · 05-12-2010

hi 3560E is connected using WS-X6724-SFP Mod Ports Card Type Model Serial No.--- ----- -------------------------------------- ------------------ ----------- 1 24 CEF720 24 port 1000mb SFP WS...

Member Since	‎05-12-2010 03:58 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	6

User Statistics

User Activity

how to advertise 2 static routes as internal routes in EIGRP

Jumbo frames support between 3560E & 6509

Re: how to advertise 2 static routes as internal routes in EIGRP

Re: Jumbo frames support between 3560E & 6509