Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hello,I have a ASA5520 with 4 Portchannel interfaces and ASA Version 8.4.(2). There are many vlan interfaces but in the DMZ I have one Server who has a Static NAT to all other interfaces. original (security 50) DMZ 10.226.224.25 translatet (securit...
Hello,I read in the document´s from Cisco that AP1262 does not work with WLC version 6.0.199.4...and the AP debug sents"Nov 24 12:05:05.522: %CAPWAP-3-ERRORLOG: This AP is not supported in controller version 6.0.199.4"My Question is...have you experi...
ACS 4.2 have a problem with the CSAuth.exe service. The ACS ist for configured for WLC authentication, VPN Client authentication and TACACS authentication on our Switches and Routers...Sometimes the service reboots when we would like to authenticate ...
Julio is it possible that I have a problem with Portchannel and security Levels ? All Vlans are connected via portchannel to this Firewall...I have 4 x 1 GB Ports connected to a redundant Nexus 5000 (2 Ports respectively) and inside have the security...
Yes the packet tracer looks good...okay now I understand what you have test...Yes the 10.226.31.10 is the translated IP and the 10.226.224.25 is the original...attched a drawing from our topologie
Hello Julio,Here the output...the first Output is what you provides packet-tracer input inside icmp 10.226.31.14 8 0 10.226.31.10the second is packet-tracer input inside icmp 10.226.224.25 8 0 10.226.31.10+++++++++++++++++++++++++++++++++++++++++++...