Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to apply an acl on my vlan interfaces that would allow the vlan to initiate tcp traffic. When I apply it I am unable to surf the web from the vlan but I can tftp from the vlan .
When I am setting the vlan allowed command I get the results that I want on the users switch, but not the server switch. When I have the port configured for switch access vlan, I cannot pass the traffic to the server, but when I have the switch trunk...
I am configuring a new core for our network. We are going from vlan one to vlans per floor. In doing this we only want the users accessing a certain vlan say vlan 10 dhcp server and app servers. When I use the switchport trunk vlan allow cmd, becau...
We are implementing vlans within our network. We have vlan routing in the switches working and have now moved on to test dhcp for each vlan. the microsoft team has set up a superscope on the test dhcp server and when a workstation say from vlan 10 t...
Here is a config I use for one network. access-list 5 permit 172.19.2.0 route-map (name) permit 10 match ip address 5 router eigrp 1 redistribute static route-map static (name)
