The Standard 6509 Chassis has a right to left air flow, where as the NEB chassis bring the air in from the front and blows it vertically thru the chassis and exhausts it out the rear.The NEB chassis is also taller and the slot are vertical. The Fan y...
Check out the following link for information of the differences between Cat5 and Cat5e.http://en.wikipedia.org/wiki/Category_5_cableI my experience I would not use anything less than Cat5e UTP for GB applications over longer runs. At this time we ar...
Check out this link, it is for the 6500, but should cover most IOS based swithces.Because you are connecting to a non-Cisco switch you have to use LACP for the channel protocol. This is because PAgP, which is Cisco Native, is a Cisco Protocol.http://...
That would depend on what mode you are running your power supplies. If you are running in Combined Mode - both power supplies provide power. However, in this mode, if one power supply fails, you risk the chance that you may not be able to supply pow...
Hi,A small piece of advise, I would suggest that you limit the number of switches that are VTP Servers. I would suggest that you set the 6509 as the VTP server and all of the access switches to VTP client. This configuration will limit vlan changes...