Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I am testing wired 802.1X with dynamic VLAN assignment on a Cisco Catalyst C1200-48P-4G using Microsoft NPS.The 802.1X client successfully authenticates through Microsoft NPS, and the switch authorizes the session.A packet capture confirms that...
The NPS policy is correct. The client authenticates successfully, access is granted, and the switch authorizes the port.C1200 does not apply the RADIUS assigned VLAN. The client remains in the statically configured VLAN insteadA packet capture on NPS...
Hi Jens, Thanks for replay, but unforunatly this command is not avliable on Cisco C1200 models based on what i can see , maybe only on 1300C1200#sh dot1x interface GigabitEthernet 10Authentication is enabledAuthenticating Servers: RadiusGuest VLAN: V...
Hi, yes, vlan is in datebase, also ive checked that by setting port in access vlan and it works normaly, so its on trunk too...i cant provide the output as there is no command on this C1200 SWC1200#show authenticationmethods Show authentication metho...
