About adrianoday

adrianoday · 12-11-2009

Hi from Australia y'all,I have a W2K server with 2 NIC:192.168.0.1 -> Ethernet connection to internal workstations, DHCP service enabled;10.0.0.2 -> Ethernet connection to Linksys AM-300 ADSL Modem (RRAS demand dial PPPoE).This works fine. Clients on...

adrianoday · 12-14-2009

Ok...I have a Cisco 877 on the way!The Linksys devices have a silly drop down menu with limited subnet masks:255.255.255.0255.255.255.128255.255.255.192255.255.255.224255.255.255.240255.255.255.248255.255.255.252I wanted to avoid at all costs, puttin...

adrianoday · 12-12-2009

Hi guys,The subnet 255.255.0.0 is working on my server and clients, however, the VoIP devices are not so friendly!(No option for 255.255.0.0)I have the following Class C subnets to choose from in a drop down list (in the router config pages):255.255....

adrianoday · 12-11-2009

Thanks to all for all your help to date!This kind of service is absolutley extinct in Australia!So please advise me if this will work (I'm totally new to advanced routing etc...)1. Make the W2K server's DHCP service authoritative for the scope 192.16...

adrianoday · 12-11-2009

Where does the 192.168.1.0/24 decvice connect to? At the most this is just a routing issue.There are 2 devices on 192.168.1.x,192.168.1.1 -> SPA3102 VoIP/PSTN Gateway (connected to switch)192.168.1.2 -> WRT54GP2 VoIP Gateway (connected to SPA3102, w...

Member Since	‎12-11-2009 05:50 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	5

User Statistics

User Activity

Routing between same subnet...

Re: Routing between same subnet...

Re: Routing between same subnet...

Re: Routing between same subnet...

Re: Routing between same subnet...