Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
The error message you see is not really an error it is a warning, which is why, when using the AnyConnect client, you can connect either though you were presented with the error.
Nos this certificate warning happens due to the normal SSL negoti...
Hi,
The option you are talking about is a certificate warning generated by the SSL parent tunnel negotiation the AnyConnect client does with the firewall, if the ASA dose not have a trusted certificate for the client on the outside interface you wil...
Hello Shawn,
There are various ways for this to work and it depends on what you want to do with the traffic of your clients. if you want all the internet traffic for your clients to pass through the ASA you can use a "tunnelall" split-tunnel-policy ...
Hello Rijath,
Based on your description of the issue it sounds like it was most likely a provider issue. there is no real way of knowing what the issue was without debugs of the issue happening but thing about it if you state that the tunnel a few h...
Hi Marcio,
I see, ok in that case what you would want is to deploy HostScan so it can scan the endpoint connecting to the ASA. this scan report will be sent to the ASA and you can create DAP policies against certain attributes that will allow the co...
