Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We recently had a vendor switch from Cisco SIP to PJSIP. After the migration it was necessary for us to add an access list to allow UDP port range 60000 65535. To the best of my knowledge this part of the reason we enabled SIP inspect several years a...
How can I word this?We have had a shift in our work force and find a large number of uses now working from home. Lately (this weekend) they have been complaining about VPN client downloads being very slow. I have tested the IPSec client and the SSL c...
What impact can we expect when we add a tunneled command to an existing firewall configuration?I have attached my configuration to TAC case #622427385 but if you advise I can share it with you?route inside 0 0 10.22.16.1 tunneledEspecially...
I would like to ask your help solving a VPN issue with the device on the far end.I have one established IPSec tunnel between the host at the far end. When they try to eatablise a second IPSec tunnel to our seconf IP we get this errorMay 9 18:51:51 o...
I would like to ask your help solving a VPN issue with the device on the far end.I have one established IPSec tunnel between the host at the far end. When they try to eatablise a second IPSec tunnel to our seconf IP we get this errorMay 9 18:51:51 o...
Here is what I have learned.First, to avoid confusion I removed crypromap_1 configuration.No change.I configured a crypto_1 just like 2 but to our Lab peer, Cisco to Cisco with the same object-groups. Works like you would expect. Connectivity on all ...
I am sorry but I do not see the issue. I wish I did?object-group network VPN_Peakview_Local_Hostsnetwork-object host 205.144.158.29 This IPSec tunnel will not come upnetwork-object host 205.144.158.30 This IPSec tunnel upobject-group network VPN_Peak...
Thank you,The Bugs just don’t seem to fit the problem but your comments are helpful. Yesterday the application folks found an issue in their configuration file and relayed to me that the issue is with both SSL and IPSec. So I am regrouping.Charlie402...
