Hello,TCAM utilization is OK, lets identify the fastest growing CPU Queue, and then we will capture traffic punted to that Q. when the CPU is High,take "show controllers cpu-interface" command 3 - 4 times seperated by 2 seconds intervalidentify the f...
Hi, Its is totally expected fir the HULC LED to have up to 30% of the cpu utilization, as thi process handles ports changes (state, poe..etc).The high cpu u r facing is under interrups (X%/Y%) where X is the total utilization and Y is the interrupt v...
Hi, This is an access list logging which tells that a packet from the source xx matched an access list entry with a log-input option configured at the end if the entry.Example:Access-list 101 permit ip host x.x.x.x any log-inputLet me know if any que...
Hello,MAC Movement is a common High CPU root cause for the switching platforms, in where the CPU will spend its time rewriting/updating MAC entries. This is a common issue when you have a STP instability in place. The CPU utilization will rise at an...
Hi,I dont think your gonna find an output with the how debug command. The logs are 1year 1weeks old This is the output of "debug ntp packets" which shows the time details to be used. The same setting can be verified with "show ntp association detail...