Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I have this strange problem with my ASA, I have configured ASA in transparent mode with inside outside interfaces and ACL and Inspection policy to block some sites, on my LAN I have 2 Exchange server 2010 (VMware) configured as clusterwhen we ...
Hi all,I am trying to configure HWIC-2SHDSL card on 2851 (IOS 15.1T) but It seems that the termination command is not supported anymore although searching on the web I did find that termination cpe|co is supported on 15.1, but in the controller shdsl...
Hi all,We have this infrastructure: about 14 branches and a HQ each branch is connected to the HQ through E1, now we want to implement a backup solution through gshdsl, in each branch there is Cisco 1841, and in the HQ there are 7204VXR and 2621MXwe...
Hi all,I am new to ASA, and I need some help in configuring ASA in transparent mode :this is what I've done so far:conifgured tow interfaces as inside and outside, configured global IP address from the same subnet , configured default routeI read tha...
Hi allI have some qustions regarding ASA 5520 (Part number: ASA5520-BUN-K9 + SSM-4GE) If we want Content filtering do we have to replace the SSM-4GE with the CSC-SSM? What if we want an IPS? Regarding CSC-SSM module: b. Does it have Single-Sign-...
Thanks Andre I really appreciate it, I am reading about NLB and Cisco , it seems that they configured NLB in Mutlticast mode and it seems with Cisco switches causes some kind of flooding which explains why I still sees the logs of the IP address of t...
Thank you very much for your answer, well I didn't configure exchange but I think they have configured it using Microsoft NLB between the two servers and I did arp lookup for the cluster MAC and it was something that begins with 03so first I should c...
