About chrisb903

chrisb903 · 10-07-2025

Hello,I was having an issue where the AP would not install the image from the WLC (AP image version 17.6.4.56 backup 8.10.183.0, Controller 17.12.5.41)It kept failing with the below errors after a sftp or tftp download (I tried many different .tar fi...

chrisb903 · 10-08-2025

@Rich R Yes, I installed 8.10.130 via TFTP using the image from that page.However, now the device will not get a network connection at all even though it did prior, so now I can't use TFTP.Now I'm trying to install ap1g6a-k9w8-tar.153-3.JK11.tar via ...

chrisb903 · 10-08-2025

@Mark Elsen Unfortunately, I can't even get a network connection. I've tried setting the IP information manually via bootloader and AP CLI but no luck. This only happened after I re-imaged the device. Also, I tried "ap-type capwap" with no luck.

chrisb903 · 10-07-2025

@Mark Elsen It's alternating between red and green flashes. It wasn't having this issue before I removed the partitions.

chrisb903 · 10-07-2025

U-Boot REL 2016.01 (btldr release 127) (May 04 2020 - 15:49:06 -0700)This product contains some software licensed under the"GNU General Public License, version 2" provided withABSOLUTELY NO WARRANTY under the terms of"GNU General Public License, vers...

chrisb903 · 10-07-2025

That worked! The AP is booting with the new image. However, now it's not sending WLC Discover messages. Do you know how to enable this? I tried pointing it to the correct controlling using "capwap ap primary-base <wlc>"

Member Since	‎10-07-2025 10:23 AM
Date Last Visited	‎10-09-2025 06:41 AM
Posts	6

User Statistics

User Activity

C9130AXI-B // Deleted both partitions

Re: C9130AXI-B // Deleted both partitions

Re: C9130AXI-B // Deleted both partitions

Re: C9130AXI-B // Deleted both partitions

Re: C9130AXI-B // Deleted both partitions

Re: C9130AXI-B // Deleted both partitions