Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HelloI worked for a carrier network ethernet, we have more than 80 nodes (Cisco NCS 5500 and ASR 920), all these nodes run ISIS/LDP/MPLS in order to deliver MEF services like E-LINE, E-ACCESS.I heard about segment-routing, I have setup a lab in order...
HelloI want to configure ISIS protocol with metric based on delay or bandwidth+delay.I read a document which is not cisco official, below is the point that I saw: IS-IS uses an arbitrary cost for its metric. IS-IS additionally has threeoptional metri...
Hello and happy new year everyone. I'm working on #CarrierEthernet network with +75 #Cisco ASR/NCS running #EoMPLS #LDP, #OSPF, #L2VPN I wonder if I have to migrate OSPF to #BGP or other IGP as our network is growing fast, currently all Label Switch ...
Hello;I have customer complaining slow connexion, I have checked the router which is installed to site, the Lan side (interface going to his Lan), I fund this related to sh controllers gi 2 | begin Statistics, many Rx/Tx Bad Pkt Errors and Rx/Tx Over...
Hello;I have cisco NCS540, the evaluation period expired and I need to active the license.See below the current license status```P/0/RP0/CPU0:lab-1-ncs540#sh license summaryTue Dec 3 14:58:03.919 CETSmart Licensing is ENABLEDRegistration:Status: REGI...
Hello @Harold Ritter Thank you for your reply.AS LDP session will be setup anyway between PEs for L2VNP services, Please, what can you see any benefits for me to migration my core network to segment-routing ?I have an other issue refer at this link h...
Hello allThank you to @Georg Pauwen and @Flavio Miranda for their reply and sharing.I want to provide more information about what I'm trying to acheave.My goal is ISIS use also delay to make routing decision.Find attach all files configuration and m...
Hello @Giuseppe LarosaThank you for your reply, I'll read the reference MPLS guide you share with me.If any concerns, I'll share in order to continue the discussion.Thank you.
Hello @Giuseppe Larosa Thank you for your reply.Only LDP, OSPF are running in our carrier ethernet network, MP BGP and RSVP TE are not used for the moment.As our network will grow fast with more ASR/NCS Cisco and all those nodes are into the same OSP...
Hello and thank you for your replyI want to give more information about how our network for carrier ethernet is setup.All ASR and NCS are connected in point-to-point (/31) for core interfaces, OSPF is running on core interfaces, there is no DR/BDR in...
