Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I am having some issues with some routing between 2 inside ASA interfaces.The setup is as follows : 2 internal networks and 1 outside, same security level on the inside networks and lower on the outside . I need full access from inside to in...
Hello,In my current setup i am using ASA5520 v8.3 to filter unwanted traffic via ACL and NAT to different servers, everything running according to plan but i am trying to create an ACL that will block multiple simultaneous requests from one single...
I am facing a problem with the new ASA fw 8.3 , i am trying to create a port forward that would allow me to port forward from outside to the inside a specific port, but also NAT from the inside, all UDP + TCP established for internet access, but thi...
I understand that NAT is needed for traffic to pass from one interface to another, but how can i translate that into a nat configuration that will work since the current config only works one-way ...object network inside subnet 10.7.0.0 255.255.255.0...
Hello,It does not happen just with the SSH , any traffic including http, only ICMP is passed tot he other IP, any other traffic ends up with the same error .I sort of fixed it by using a NAT :object network inside subnet 10.7.0.0 255.255.255.0object ...
I tried the packet tracer but it says that traffic is allowed and when I try to pass traffic between those 2 ip's it does not work and gives and error .6 Jan 06 2011 05:30:53 10.7.0.106 44632 10.5.0.103 22 Deny TCP (no conn...
That does not fix my problem .So to quickly review :I have a webserver running on port 8080 that i want port forwarded to the external 80 port so the websites works, and in the same time have nat working so that the server has internet access via NAT...
That did not work , after adding that line i still don't have ICMP/DNS ..and other services from the server to the outside ...basically only the port forward works , nat from inside-> outside fails
