You can do that as explained in the example in http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00809763ea.shtml
ciscoasa(config)#class-map tcp_syn
ciscoasa(config-cmap)#match port tcp eq 80
ciscoasa(config-cmap)#exit
ciscoasa(config)#policy-map tcpmap
ciscoasa(config-pmap)#class tcp_syn
ciscoasa(config-pmap-c)#set connection conn-max 100
ciscoasa(config-pmap-c)#set connection embryonic-conn-max 200
ciscoasa(config-pmap-c)#set connection per-client-embryonic-max 10
ciscoasa(config-pmap-c)#set connection per-client-max 5
ciscoasa(config-pmap-c)#set connection random-sequence-number enable
ciscoasa(config-pmap-c)#set connection timeout embryonic 0:0:45
ciscoasa(config-pmap-c)#set connection timeout half-closed 0:25:0
ciscoasa(config-pmap-c)#set connection timeout tcp 2:0:0
ciscoasa(config-pmap-c)#exit
ciscoasa(config-pmap)#exit
ciscoasa(config)#service-policy tcpmap global
I think that is what you need.
PK