Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Question for the forum:We have a 9105AXW in WorkgroupBridge mode , and would like to utilize the LAN ports to connect wired devices.We are powering the device with a POE injector as it is in an area where we don't have direct LAN connections. We ar...
Working on configuring a few 9162i and have a need to put an AP in an area where there is no cable drop but needs WiFi coverage. We have an on-prem WLC 9800 virtual cloud (17.18.1) running and the AP that is wired to it is provisioned and working. ...
Understood, the WLC will not provision the AP when it is in WGB mode (not CAPWAP). With CAPWAP need to have a connection to the network to work as the AP is not meshed. WGB allows the AP to provide the wired clients a wireless client path which is ...
Thank you.I have looked at that solution and can enable the ports through the WLC and RLAN configuration when the AP is in CAPWAP mode and that requires the AP to be plugged into a network which is not available.We are trying to use the AP in Working...
