About Gavin-mcmichael07

Gavin-mcmichael07 · 02-04-2026

I have 5 Cisco Aironet 3802i-B-K9 Access Points. One of which is configured for ME with version 8.10.196.0. The other four I will be using in CAPWAP mode. They are appearing in the Web UI, but for some reason they will not join. I've tried upgrading ...

Gavin-mcmichael07 · 02-06-2026

I would Like to say that I have found a solution. I don't have a Service contract for any of these APs, so I couldn't download 15.3(3)-JK11.What I did to fix this issue was install the 8.10.196.0 ME image onto the APs I desired to be CAPWAP, and afte...

Gavin-mcmichael07 · 02-05-2026

Right now the CAPWAP is using 8.5.161.0 I believe, the 17.15.4.160 image is being used as the back-up image. The 8.10.196.0 image was the latest one I found for the 3802i ME file, and that 17.15.4.160 Image on the CAPWAP is being used as the backup. ...

Gavin-mcmichael07 · 02-04-2026

Problem is the Web UI on those I think is a little different as compared to the 3800 series controller. The AP is already in Local state on the same subnet as the controller.It's odd, because the AP sees the controller and is requesting to join it, a...

Member Since	‎02-04-2026 07:23 PM
Date Last Visited	‎02-27-2026 12:07 AM
Posts	4

User Statistics

User Activity

3802i-B-K9 APs not joining ME WLC

Re: 3802i-B-K9 APs not joining ME WLC

Re: 3802i-B-K9 APs not joining ME WLC

Re: 3802i-B-K9 APs not joining ME WLC