Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a 3725 that was using tacacs for auth but that is not working with our new ACS 5.1 server so for simplicity I would like to switch to radius. The authentications pass but the dial in user gets error 738 "didn't assign an address" My auth on th...
I am trying to set up a p2p connection to a site where they want me to nat our ips to a different scheme. Here is the relevant config access-list INTERNETHUB2_cryptomap_60 extended permit ip 10.99.48.0 255.255.255.0 host 32.90.100.7 access-list poli...
interface Group-Async1 ip unnumbered FastEthernet0/0 encapsulation ppp ip tcp header-compression no ip mroute-cache async mode interactive peer default ip address pool 172.30.3.0-172.30.3.150 no keepalive no fair-queue ppp authentication pap group-ra...
General OS: AAA Authentication debugging is on AAA Authorization debugging is on AAA Accounting debugging is onPPP: PPP detailed event debugging is on PPP authentication debugging is on PPP protocol errors debugging is onRadius protocol debuggi...
I have no control over the other end but they claim to have it set up. Wouldn't I see attempts at isakmp coming up in the case they weren't configed? Also the section for 172.30.5.0 natting shows no translations. I have a machine with the address 172...
I have some made the following changes to this configaccess-list nat_for_ivans extended permit ip 172.30.5.0 255.255.255.0 host 32.90.100.7 global (INTERNETHUB2) 1 10.99.48.1-10.99.48.254nat (VLAN1) 1 access-list nat_for_ivansneedless to say the stat...
