Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,I have an access point (9130AXE-B) that can't join the 9800 controller on 17.18.1 version. Below is the AP output:[*03/25/2026 00:30:43.1078] AP image version 8.10.130.0 backup 0.0.0.0, Controller 17.18.1.8[*03/25/2026 00:30:43.1078] Version ...
I have one AP 9136 for my lab which is stuck at boot and it looks like it's missing boot image.I have an image file ap1g6a-k9w8-tar.17_18_1_8.tar and tftp server but can't seem to find a procedure on how to load this file and boot from it. If you can...
No WAN links nor VPN between the WLC and AP. The WLC is virtual and the VM host is connected to the same switch as the AP. The WLC and AP are on two different subnets but nothing special. I do have 9120 connecting to the same port working fine but 2 ...
After I ran the command, the AP restarted. It went back through the process and it still didn't join.On the controller, I can see the AP during the join process and then it drops off when it fails to finish.
