Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
When HBA port and the storage port are connected to the same switch. Some HBA ports require a different area ID than storage ports when they are both connected to the same switch. For example, if the storage port FC ID is 0x6f7704, the area for this ...
Hello,Please ensure you are committing the changes before you exit.http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/4_1/configuration/guides/fm_4_1/ddas.html#wp1140028to view pending changes from CLISwitch#show device-alias pending-diff...
Hello Ronen,Are you resetting the module gracefully (ie using CLI to reset) ?Call home will not be generated in case you reload the module using CLI. Instead try re-seating the module physically.Thanks,Prateek
Hello Matthias,Cisco Fabric Switch for IBM BladeCenter (20 ports; 14 internal 2/4 Gbps, and 6 external full-rate ports) licenses for internal ports are allocated as the ports come up. Licenses for external ports are allocated sequentially. Refer "On-...
Hello,Solution to your problem is using trunk allowed list configuration on ISAL interface.When an ISL inteface comes up the default trunk allowed list configuration is to allow all VSANs. You can trim the trunk allowed list to manage the VSANs that ...
