Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to run a query for wifi phones that are not currently associated to see where they were last seen. C:\Downloads\curl\bin>curl -k -u username:password "https://myserverwcs.corp.phcs.org/webacs/api/v4/data/ClientDetails?macAddress=%224C:00:...
We recently deployed infoblox netmri. Soon after turning on the snmp discovery, we started getting alerts from our monitoring system saying 3750X stacks were not reachable. During We verified that during the time when we receive the alert, the swi...
I am getting an error when making changes to ipcc 4,05 build 042, that I cannot make changes while a backup operation is running.I rebooted the IPCC server since then as well as the publisher, but no luck. I found a technote saying to run cleararch...
Hello,I have IPCC 3.5 running. We have a script where calls are sent to different queues based on a code that the caller enters. We then use that code to perform a database lookup to get the CSQ and the voicemail box to send calls that callers d...
does this mean that the RP will never send SAs to MSDP peers for which the MSDP/RP is the first hop? for example if my anycast RP(which is also an msdp source) is the default gateway for the server sending to a specific multicast, will that S,G neve...
based on the following output, it does not appear we are overflowing TCAM are we? I see plenty of head room......1P-C2-IDF-01#sh platform tcam utilizationCAM Utilization for ASIC# 0 Max Used ...
the thing that also concerns me is the amount of time that the CPU is spending on interrupt. The reading I have done says it should be at about 2%, but we are running at 27%. We even tried disabling igmp snooping. Doing that got us lower cpu on...
we are storing the contact service queue to send the call to.....I changed my script to have the variable set to integer to match the database. When I had this setup, the promps would not even play to collect the digits. I setup a new table in the...
upon further inspection the database has the csq defined as integer, but the script is defining queue as string.When I tried changing the script to match the database, I do not even play any prompts, I just get the system error prompt.I have an exist...
