Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello AllAt my work we have a cisco ASA 5505 which is running fine. On that asa we've set-up a DMZ on it with webterminal for the home users. Also this is working. The problem I've is that when I access the webterminal I can access al the servers and...
The problem is with the 4th tunnel it doesn't come up automatiqly. Only when people are working at the other side the tunnel will initiate. After 36 hours it fals out and I get this problem with it. the strange thing is that the type and the hash is ...
Hello AllI've a asa 5510 on the main site and different ASA 5505 on secundary sites for VPN tunneling between the sites. The problem is that the tunnels are acomplished but no traffic is going over them. What am i doing wrong? For the moment there is...
HelloWe've bought a Cisco ASA 5505, this one was broken and should be send to cisco for repairs. When it returned to us the 3DES en AES encryption were not working anymore.I type in de CLI show activation-key and this was the output:Licensed features...
HelloFor some reason it is not possible to setup a connection with my adsl service provider. Attached 2 configs that were not working. My SP provided me with the following information but I don't were to start.INFO SP:Wan Type: PPPoEProtocol: PAPline...
HelloThe problem was that the OLOTS03 had the wrong default gateway. I've putted a static route in the OLOTS03 to the WEBTS and then it worked fine like you said I shoud do it.Thanks for the help. The next step is to access it from the outside interf...
Hello JenniferI tested something and the access-list of the DMZ is working fine. It is the STATIC NAT rule which I cannot configure Correct. I should allow traffic over port 3389 to the inside but I can not figure out how.If I aplie this NAT rule:sta...
