Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I've setup a loadbalance policy where the ACE looks at a tcp/443 VIP and then balances sessions (based on source IP) to two different webservers. On these webservers the SSL cert is offered to the client and then we're all happy and secure.Howe...
Hi,This is my first setup of an MDS zone and I can't figure out what I'm doing wrong here. Here is my config that matters:device-alias database device-alias name TESTST01-B pwwn 20:15:00:a0:b8:11:39:de device-alias name TESTSVR01-A pwwn 21:00:00:1b...
Hello,I'm setting up an CSS to balance http traffic. So far I've got the following setup working:!*************************** OWNER ***************************owner CUST content WEBAPP advanced-balance arrowpoint-cookie add service APP01 ad...
Hello all,We have the current licenses installed on two of our 4710's:Licensed Feature Count------------------------------------ -----Compression Performance in Mbps 500Web Optimization Concurrent Conns. ...
Hi,I have a setup where a customer uses a 1841 as his CPE and he uses VPN Client to connect to the Fa0/0 LAN. The VPN Client pool is 192.168.2.0/24 and the Fa0/0 LAN is in the 192.168.1.0/24 range.Is there a possibility to have a VPN connected user t...
I can't use SANsurfer since I'm booting from SAN. I have no OS to install it on. All I have is the BIOS which is telling me that there is no storage device attached.
I found the option "Loop only/Point to point/Loop only preferred". Tried all of them but still no connection. Next up I will try to get access to the storage device to see how that's configured. Any other ideas? I'm guessing it's something simple tha...
I've checked the settings on the HBA (it's a qlogic) and there is no such thing as a "Server to storage" setting.I figured something else out:FCSW# fcping pwwn 20:15:00:a0:b8:11:39:de vs 128 bytes from 20:15:00:a0:b8:11:39:de time = 2709 usec28 bytes...
Thanks for clearing out that the config should work. When I connect server and storage directly I see the PWWN of the storage pop up in the qlogic bios and I can connect to the assigned lun. When I use the MDS with the config listed above I don't see...
That's an easy answer. Thanks a lot! Really helpful! I know that the ACE can do it. We're also using ACE's in a different setup but here we're stuck with a pair of CSS'sThe easiest solution right now is to have the customer who we want balanced over ...
