Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have read through the Meraki's AP configuration guide about MAC address filtering, and see that it only support via "Association requirements" with "no encryption."In non-Meraki, Cisco-based Wi-Fi infrastructure, you can use both WPA2 encrypted dat...
Issue is that none of the Wi-Fi clients receive an answer to their DHCP request (Windows 10, Apple iOS, and Apple MacOS Tested). The MR45 devices are DHCP themselves do receive an IP from the same DHCP Server, in the same VLAN.Access Points: MR45 Fir...
Move the native cisco cli command to a different VLAN that will not be used in "VLAN Tagging" worked.Thanks PhilipDAth, and all other for the helpful replies.
I get it, the access point should not be in the same VLAN as any tagged VLANs listed in a SSID.I will try that during the next round of test, and provide feedback.
Now running 26.4 on all APs.Still have to the same issue.DHCP Failures from the LAN tab for the AP that the test device is connecting to.DHCP request status on VLAN 35 of the last 5 requests did not receive responses. Req. ID Client MAC Server IP Req...
