Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,In the following example of a QoS queue-set command on a Cat3750.“mls qos queue-set output 1 threshold 2 3100 3100 100 3200”.If for example the buffer space for this queue is 100.Threshold 1 and 2 will drop at 3100 buffers - ie anything over 10...
Hello,When looking at the Branch Office WAE "show statistic connection pass-through" some servers show up as PT Server-Blacklist but not long after show up in the optimized list.Is there a method to stop servers appearing in the "Blacklist" as optimi...
Hello,I have been looking for information relating to the configuration of WCCP in relation to standard client side NAT of private addresses. NAT order of operations gives some indication of how it works but I am wondering if there is any recommended...
Hi Shashank,Thankyou kindly for your post.You have indicated nothing can be mapped to threshold three on this platform, but Threshold 3 seems extensivley mapped on this platformeg from the Cisco medianet4.0 design guide.mls qos srr-queue output dscp-...
Thanks Bhavin for the reply.I had looked at the NAT order of operation which does give some indication of how the config should be. If wccp occurs before NAT then configuring redirection on the LAN side interface and configuring the WAE interface as...
