About joincidence

joincidence · 02-08-2024

I have an SSID set up with Radius and Microsoft NPS servers with wireless AP's as Radius clients. The two radius servers work successfully when individually testing with a phone. I use AD groups to set Meraki group policies. Works great. Now, I was ...

joincidence · 01-11-2024

I've been trying to get this to work with Meraki Location and Scanninghttps://developer.cisco.com/meraki/scanning-api/introduction/#scanning-apiso it can send me data to work with. I've been using thishttps://github.com/dexterlabora/cmxreceiverIt wor...

joincidence · 12-28-2023

I'm trying to get the http receiver(with HTTPS) to work for scanning API. On http it works fine, but Meraki requires https. I went here:https://developer.cisco.com/meraki/scanning-api/overview/#overviewAnd tried the resources provided, but the docume...

joincidence · 09-23-2019

I posted on here about a week ago on how to get more than 1 page. The solution was looking at the headers.link and there are 2 links in there with relevant 'startafter' data to give me the pages. This gave me around 1800 clients, and I thought it wou...

joincidence · 09-12-2019

Max clients per page is 1000, and I have more than 1000 entries I need to retrieve. I can't seem to figure out the parameters to use for specifying a time range, so that I can make multiple calls with different time ranges, and get all of the data. A...

joincidence · 02-10-2024

None of the 4 other engineers I contacted in support said it could work unless I either do non-splash radius or I get the failover option by getting new firmware. I'm taking their words over yours, because they have actually done packet captures on m...

joincidence · 02-09-2024

Alright, so it is indeed the lower firmware version keeping me from seeing the advanced option of failover in non-splash radius. The last two now confirm it, though the first did not. He was "Non-splash radius won't do failover period".Having the opt...

joincidence · 02-09-2024

I'll start one more case, mention that you think it's possible, and I'll report back my findings.

joincidence · 02-09-2024

Support told me why it's not working in my environment--that this will not work with non-splash radius--that in this configuration it doesn't matter what's in slot #2 if slot #1 is down. It just keeps sending packets to the first one and doesn't try ...

joincidence · 02-09-2024

I've started a case with three different people in Meraki support, and every time we were unable to make it work. The most recent call, they said it's because Radius for splash supports failover and standard radius does not. He did a packet capture a...

Member Since	‎09-12-2019 01:10 PM
Date Last Visited	‎03-28-2026 01:06 AM
Posts	22
Total Helpful Votes Received	3

User Statistics

User Activity

How can I get Radius server fail-over to work?

Can someone who has gotten a CMX https receiver to work tell me their setup?

Trying to get http receiver to work for scanning API

Retrieving more than 2 pages of 1000 clients from GET /networks/{networkId}/clients?

How can I specify a time range using GET/networks/{networkId}/clients or get more than 1000?

Re: How can I get Radius server fail-over to work?

Re: How can I get Radius server fail-over to work?

Re: How can I get Radius server fail-over to work?

Re: How can I get Radius server fail-over to work?

Re: How can I get Radius server fail-over to work?