Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
This is mostly a sanity check. We have dual MX250's for redundancy. If I do the firmware update, it will do one after switching the network over to the other MX250, and then when it is done, switch back and do the other one, so we won't be down til...
Is there any way to setup a couple second delay for this? Due to ISP's (Comcast) mostly, we get a bunch of false up/down alerts.Would be nice where it waits say 5 to 10 seconds before alerting the connection is down on our users VPN boxes.There is n...
Is it possible to setup something on the MX (we have MX64s and Z3) where anything except for the computer with a specific MAC address won't be able to do anything when plugged in to the VPN box? I would suspect this would be a basic security feature...
I have someone that everything looks fine for the Z3 in Meraki's interface, and things plugged in to it work fine, but the link light is orange. Has anyone heard of something like this? Have rebooted it and the ISP's provide modem (powered both off...
I have some systems with an older version of the SM Agent, and they have been active for quite a while, but they are still running version 1.X. They show up connected in Meraki. The agent version currently is at 3.0.2. I can manually update them, ...
I am running into this also, but if I tell it to do it now, it still gives the error. It could very well be a template thing, but our MX64's don't get the message, but the Z3's do.
Is there any way to have the 2FA through Azure without needing the Radius server? We have Azure using Hello as the 2FA, and would like it where when someone connects to the VPN through the windows VPN client, they have to put in the Hello pin.
