Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,My customer needs to connect one servers system in particular DMZ, with other systems in corporate LAN. The requirement is that all LAN servers/workstations can reach the DMZ server over particular ports. In the opposige direction, this DMZ ser...
I am using ASA5510 with outside interface connected to Internet over PPPoE, inside for HQ LAN and one more interface connected to remote office. Traffic to remote office should be tagged with certain VLAN tag. Remote location should access HQ LAN and...
Hi Marvin,I found this conversation today, as I am looking for answer on question similar to question that Jerry asked, while opening this discussion.So, my problem is the following. At some location, I need two 10GB and one 1GB connection over opti...
When I decreased sec level of tehc interface to 90, I was able to reach remote LAN from local (inside) LAN. Access from remote LAN to local LAN is not allowed (probably due to decreased sec level on tehc interface). Of course, all that together with ...
I tried what you suggested, but there is no traffic between inside and tehc interface.The tehc interface is connected with one Sarian router, and remote LAN is at the other Sarian's router interface.Without any nat and/or global command in ASA config...
