Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Mates,I have situation where i have existing WS-C3750G-48TS is installed into the network.. i need to expand the LAN port capacity hence i am adding one more WS-C3750X-48T-S switch into the network and want to make it stack.My existing WS-C3750G-4...
Hi Shillings,i have select c3750-ipbasek9-mz.150-2.SE.bin IOS in order to support stacking.Current switch is 3750G-48TS (c3750-ipbasek9-mz.122-55.SE4.bin) and 32 mb flash. i am adding new switch which is 3750X into Gig swtichCan you please guide me f...
Hi Mates,I have Cisco 3750G (WS-C3750G-48TS) switch which is standalone and having current IOS c3750-ipbasek9-mz.122-55.SE4.bin on it with flash 32MB.I want to add new switch 3750X-48T-S and make it as stack one.I have gone through the document and f...
By default all port are configured as switchport dynamic desirable mode hence they always try to negotiate with other side.Best idea would be just change those port as access port by giving below commandSwitchport mode accessThanks,HP
