Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an MR57 AP connected to our Catalyst 9200L. When staff is using their MacBooks, they stay connected for about 2 minutes, then the connection is dropped. Once it's dropped, it does not connect to ANY other APs until it is manually selected in t...
Hi!We have a couple of the MR57 APs that we're testing in our environment. When plugged into 3560-X or 3650 PoE+ switches, it operates at 30W normally, no issues. When plugging into 9200L switches (the model we primarily use for APs), it runs in low-...
UPDATE:Other SSIDs (pointing to different VLANs) that are assigned to the APs work with no issues. I created a test SSID pointing to the same VLAN as the problem SSID, no issues there either. I'm thinking it may be something with that specific SSID.
Is there anything specific to look for? The same SSID is on every other AP in the building which have no issues. Would there be a setting somewhere that conflicts with the MR57?
