About stevejennings

stevejennings · 11-04-2010

I use pre-shared keys for authentication, and I have written an automated script for periodically updating (rotating) keys. However, sometimes the rotation fails and I get paged in the middle of the night. So I had an idea:crypto isakmp policy 1 encr...

stevejennings · 03-16-2010

I've followed a couple of threads where this message shows up and I'm confused about whether or not I should care. When I type "dir" at the command line on the 6509-E I get "No files in directory" for disk0:/. The image is actually on sup_bootdisk:/...

stevejennings · 01-28-2010

When I do a "show ip eigrp events" I see "Ignored route, neighbor info: 10.46.246.14 FastEthernet0/2". Two things: (1) FastEthernet0/2 is administratively shutdown (2) there isn't a dup router. I have had a Cisco TAC case opened on this for about 6 w...

stevejennings · 11-04-2010

Hahahaha . . . me too. So I wonder why it doesn't work?Thanks,Steve

stevejennings · 11-04-2010

Thanks for the response . . . but I don't follow. You're saying the "key" command is global, understood . . . but policy 10 fails because the keys don't match, and policy 20 uses certificates for authentication. You're saying policy 20 wouldn't be t...

stevejennings · 03-16-2010

Thanks for the response. After I opened the question I noticed that the image file name was different ( . . . WAN-M vs. . . . WAN-VM). So if I "install" the image to disk0:/ then . . . what, the image and file structure would be located on disk0:/ an...

stevejennings · 01-28-2010

<<<<>>>>There are 3 7204's involved, all receiving the same BGP distribution into the same EIGRP processes.<<<<>>>>Yes, that's right.<<<<>>>>It's an "undocumented" Cisco command: show ip eigrp events<<<<< I wonder if you are seeing the signs of a com...

stevejennings · 01-28-2010

Also . . . the route being ignored is coming from a BGP redistribution into EIGRP.And . . . the 10.46.246.14 address is the G0/2.1 subinterface of the sending router.Thanks again,Steve

Member Since	‎05-19-2003 06:31 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	13

User Statistics

User Activity

Using 2 ISAKMP policies, if policy 10 fails, try policy 20

show ver indicates "Patching not available. . . "

show ip eigrp events: route ignored, dup router on i/f that's shutdown

Re: Using 2 ISAKMP policies, if policy 10 fails, try policy 20

Re: Using 2 ISAKMP policies, if policy 10 fails, try policy 20

Re: show ver indicates "Patching not available. . . "

Re: show ip eigrp events: route ignored, dup router on i/f that'

Re: show ip eigrp events: route ignored, dup router on i/f that'