Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm scratching my head over a recent issue that appeared while upgrading one of my NPS servers.I had removed one of the servers from the configuration to allow my self some time to finish the config. By the time I was finished and reintroduced the ne...
I was wrong..The error kept happening and I was thinking >1 second is quite a long time for authenticating to wireless. When I did pcap on both ends I could see that the larger packets were being fragmentet on the NPS and probably dropped somewhere a...
Think I've found the cause and it was a quite simple issue I noticed that the issue was only happening while I had 2 radius server configured. After pcap I could see that: Server 1 starts the EAP session, processes Client HelloBefore 1 can respond, ...
I'm not using any proxy, I have the radius clients configured in the NPS by network for the management lan. I created a new NPS secret yesterday just to make sure there was no whitespace och special characters etc but no change.We have a VPN to 2 VMX...
Yes, that's the logs I'm checking. The NPS basically just says The RADIUS Request message that Network Policy Server received from the network access server was malformed.Looking at the message everything looks normal. Called Station ID is okay, corr...
