Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, utter novice here with a very old Sun server behind a Pix 501 (v6.3) running PDM v3.0.I need to access the server files from a remote location but I am overwelmed trying to learn how everything works.It seems that I need to simply either creat...
Hardware:Sun Enterprise 250 ServerCisco Pix 501 FirewallHello everyone, I am brand new to what I am trying to do here, so I'd greatly appreciate any hints. I am trying to troubleshoot a problem where our website goes down almost every day. I believe ...
Using this as a guide (https://supportforums.cisco.com/docs/DOC-1972), I came up with the commands below: static(inside,outside) netmask 255.255.255.255access-list 101 permit tcp any host 5900access-list 101 permit udp any host eq 5900(Note: I do...
Thank you very much Federico. I think I see all of the IPs I need in the PDM. I have not yet figured out how to edit the config file within the PDM - I can view it though.If I learn how to do that, I'll try your code if you wouldn't mind. Tell me tho...
So, the power supply connector on the PIX board is definately a part of the problem. If you gently twist the plug in the connector, or otherwise bump it, the VPN tunnel light will go on, several lights will start flashing, and the connection will sta...
So, the IDS Policy section has two custom entries in it, one for information, and other other for attacks. Thing is, they are both only set to "alarm." So I will try changing them both to also include "drop" and "reset." Maybe this is the, if not par...
I've learned that 106023 can indicate port scanning. So, I've been plugging IP addresses into reverse-DNS lookup website and low-and-behold, some of the IP's are in China.UPDATEBetween Aug 13 and today, there are 700 IPs that were logged in the PIX w...
