Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Does anyone know why my 6509 will occasionally query an entire subnet with ARP requests? It's pretty infrequent (maybe once an hour or once ever 2 hours) but when the router sends out a massive broadcast (2 ARP requests per IP for the entire class C...
I am seeing throughput of 1.5Mbps and lower when trying to copy a large file (a RedHat .iso) via FTP across my 6509 (running in hybrid mode). Sometimes as low as 200kbps. There are Gb uplinks between the subnets connected to the 6509 and of these ...
What kind of performance hit will I see on a Cat6506 running in pure IOS mode when I am exchanging full BGP routes with 2 ISPs and have policy routing enabled? Basically, what I'm interested in is will I have less latency by getting rid of the polic...
What kind of performance hit will I see on a Cat6506 running in pure IOS mode when I am exchanging full BGP routes with 2 ISPs and have policy routing enabled? Basically, what I'm interested in is will I have less latency by getting rid of the polic...
I was told at Networker's that there was a software upgrade coming out for the NAM that would recognize more protocols so that 90% of the traffic is not listed as "Others." I've been sniffing and manually adding protocols to the NAM, but hey, I'm la...
Thanks for your excellent explanation. If it truly is a host or server issue, I wonder why FTP transfers are pretty fast when transferring to the server on the same subnet. It only seems to be extremely slow when routing between two subnets. Also,...
Thanks for your response.I'm going to try to answer your questions in order:It's the same across all VLANs.I've checked for errors and I'm not seeing any. Speed/duplex actually was an issue with the first server I noticed it on. I had hard-coded 10...
Don't you have to enter the command "no switchport" in order to make it a routed port?Try this:http://www.cisco.com/en/US/products/hw/switches/ps646/products_configuration_guide_chapter09186a00800c6f5b.html
If the MTU size is being exceeded, what would be the best solution? Increasing the allowed MTU to something above 1500, like 1548 for every switch? Is there a different/better solution?Thanks,Matt